ABSTRACT Engineering machinery is characterized by high load frequency, large amplitude, and long continuous working time, which requires high anti-loosening performance of bolts. In this paper, based on DIN65151, a transverse vibration test is designed. By changing the surface roughness, hardness, and coating thickness of the connected parts, the specimens with different surface process parameters were obtained. Tightening and transverse vibration experiments were carried out to monitor the changes in preload force and to study the surface process parameters of the connected parts to investigate their effect on the anti-loosening performance of threaded fasteners. The research results show that the smaller the surface roughness, the higher the surface hardness, and the smaller the coating thickness, the better the anti-loosening performance of the bolt. frequency amplitude time antiloosening anti loosening bolts paper DIN65151 DIN designed roughness hardness obtained fasteners bolt DIN6515 DIN651 DIN65 DIN6

Abstract The purpose of this study was to analyze the differential expression of DEC1 in oral normal mucosa (NM), oral leukoplakia (OLK) and oral squamous cell carcinoma (OSCC). Surgically excised specimens from patients with OLK (n = 47), OSCC (n = 30) and oral normal mucosa (n=11) were immunostained for DEC1. The expression of DEC1 protein was evaluated, and its association with the clinicopathological features was analyzed. The expression of DEC1 in NM, OLK and OSCC tissues increased in turn, and significant differences were observed among the groups (P < 0.0001). In terms of the association between DEC1 expression and epithelial dysplasia, DEC1 expression was lower in hyperkeratosis without dysplasia (H-OLK) than in OLK with moderate to severe dysplasia (S-OLK), and these differences were significant (p < 0.05). The expression of DEC1 in OSCC with OLK was significantly higher than that in OSCC without OLK (p < 0.01). Therefore, DEC1 could be a potential biomarker of malignant transformation in the carcinogenesis of OSCC, which may provide a new research direction for the transformation of oral potentially malignant disorders (OPMDs) into OSCC.

A laboratory-scale anaerobic/anoxic/oxic system operated at the hydraulic retention times (HRT) of 20, 40, and 60 h with mixed liquor suspended solids (MLSS) concentrations of 3 g/L and 6 g/L was considered for treating chemical industrial wastewater rich in complex organic compounds and total dissolved solids. Extending the HRT and increasing the MLSS concentration resulted in higher removal efficiency for chemical oxygen demand at 72%. Organic compounds in wastewater could be classified into easily-removed and refractory compounds during treatment. The easily-removed compounds consisted primarily of ethers, alcohols, and aldehydes, whereas the refractory compounds included mainly oxygen-containing heterocyclic and benzene-containing compounds. Results from energy-dispersive X-ray spectroscopy showed that several metal ions accumulated in activated sludge, particularly Fe(III). Fe accumulated mainly on the surface of sludge floc pellets and resulted in the compactness of activated sludge, which caused the values of mixed liquor volatile suspended solids /MLSS and sludge volume index to decrease.

A laboratory scale aerobic oxidation ditch combined with an anoxic reactor was conducted to treat wastewater from a chemical industrial park in Tianjin, China. The wastewater exhibited a low biodegradability, and the results of gas chromatography mass spectrometry (GC-MS) analysis showed that some recalcitrant organic components are present in the wastewater. Ammonia nitrogen (NH4+-N) removal efficiency of over 90% was obtained. However, the removal efficiencies of total nitrogen (TN) and chemical oxygen demand (COD) were below 16% and 15%, respectively. The addition of glucose to the anoxic reactor in the system increased the removal efficiencies of TN and COD to approximately 72% and 25.57%, respectively. Results of mass balance indicate that about 60% of the external carbon was consumed as electron donor for denitrification, while 40% was consumed as a substrate for co-metabolism. The optimal dose of added glucose was also investigated, which was determined at 0.35 to 1.20 (CODglucose:CODoriginal).